Perfostar N1A
Photo 1 en taille normale

    Le Perfostar N1A 1 Le Perfostar N1A 2 Le Perfostar N1A 3 Le Perfostar N1A 4

  Prezzo : 7019.00 € (prezzo pubblico indicativo)

Descrizione del prodotto :
For permanent and indelible marking in one
operation. Forms, labels, receipt blocks, documents,
passports, etc. can be marked for example
with a date, a number or a designation.
The machines from this series are recommended for
perforations consisting of a frequently changing
combination of numbers or letters or if markings of
variable length or design are required. The machines
are manufactured according to your specifications.
The wheels may contain numbers, letters or symbols
and in most cases an additional blank space with
which unused digits are excluded from perforation
inserting a blank space instead.
In the standard version the machines are manufactured
with 6 wheels in a figure height of 5.5, 6.5,
7, 8.5 or 10 mm.
The standard equipment comprises adjustable rear
and side gauges.
Up to 3 lines one below the other can be perforated
in one operation; a firm text can be installed above
or below, in front of or behind the wheel block.
With 6 digits in 7, 8.5 or 10 mm character height,
the capacity is about 25 sheets of 70 g paper.
Important
In case of order please state whether the perforation
is to appear in the top or in the bottom of forms. For
example, if the lower edge of the document is being
perforated, the die unit and wheels are manufactured
upside down and in mirror face thus allowing the
perforation to appear legibly

With a character height of 7 or 8.5 mm, up to 12
digits can be adjusted quickly and comfortably via
the wheel block; with a character height of 5.5 or
6.5 mm, even up to 15 digits. A character height
of 10 mm allows still 10 digits side by side.
The desired imprint can be placed up to 100 mm
from the upper or lower edge – measured from the
edge of the forms to the centre of the perforation.

Number perforating machines with automatic consecutive
numbering. The standard version comprises up
to 6 number wheels (all wheels without blank space).
After each completed perforation, the subsequent
number is adjusted automatically. In special version,
the same number can be skipped also after 2, 3 or
4 perforations. Upon request, the automatic consecutive
numbering can be switched off.
The automatic wheels are manually set by a removable
adjusting pin.
 



 
Opzioni
- stroke counter (counting completed perforations)
- security lock (preventing unauthorized use)


Caratteristiche tecniche
Standard version 6 number wheels
Standard character heights 5.5, 6.5, 7, 8.5 or 10 mm
Maximum capacity 25 sheets 70 g paper
Insertion depth from paper edge to perforation centre approx. 100 mm
Max. perforation width 84 mm
Weight net / gross 21 kg / 23 kg
Machine dimensions 32 x 15 x 23 cm
Packing carton
Carton dimensions 54 x 26 x 33 cm